UK: Постановка проблеми. Розглянуто проблему впливу капілярно-пористої структури, яка
характеризується наявністю просторової гратки із мікропор, капілярів і різних дефектів на міцність і стійкість
полімербетону. Мета статті – оцінювання методів визначення пористості (загальний об’єм і розподіл пор за
розміром) як структурної характеристики компонентів полімербетону, заповнювачів і наповнювачів. Висновок.
Зменшення міцності фуранових композицій визначається головним чином за рахунок пороутворення в
результаті незмочених агрегатів із частинок дисперсного наповнювача. Результати експериментів свідчать, що
із збільшенням дисперсності наповнювача зменшується об’ємна маса зв’язуючого за умови постійності
відношення п/н, що пояснюється збільшенням пороутворення в результаті нестачі полімеру і прояву ефекту
захоплення повітря. У разі повного просочування мінеральних компонентів полімер розподіляється по всьому
об’єму і формується безперервна і рівномірно розподільна гратка з полімеру і його пористого простору.
Відповідно полімербетон ущільнюється і створюється контакт між матрицею і полімером.
EN: Problem statement. The problem of influence of capillary-porous structure, characterized by the
presence of a spatial lattice of micropores, capillaries and various defects on the strength and stability of concrete
polymer, is considered. Purpose of the article. Estimation of porosity determination methods (total volume and size
distribution of pores) as a structural characteristic of concrete polymer components, aggregates and fillers. Conclusion.
The drop in strength of furan compositions is mainly determined by the pore formation as a result of the accumulated
wetted aggregates from the particles of the dispersed filler. The results of the experiments show that with increasing the
dispersion of the filler there is a decrease in the volume of the binder under the condition of constant ratio p / n, which is
explained by the increase in pore formation, which is increased due to lack of polymer and the manifestation of the
effect of air trapping. The complete impregnation of the mineral components creates a polymer distribution over the
entire volume and forms a continuous and evenly distributed lattice of the polymer and its porous space. Accordingly,
the polymer concrete is compacted and contact is formed between the matrix and the polymer.