UK: Постановка проблеми. До складу сучасних бетонів і розчинів входять поверхнево-активні речовини, які регулюють процеси гідратації, структуроутворення і, відповідно, властивості штучного каменю. Одним із видів поверхнево-активних речовин є пластифікатори, їх основне призначення – зменшити витрату води. При розгляді їх впливу можна відзначити більш широкий діапазон зміни властивостей розчинів і бетонів. При цьому особливу увагу слід приділити алюмінатним, сульфатним і сульфоалюмінатним зв'язуючим. Тому розробка композиційних в’яжучих системи CaО – Al 2 O 3 – SO 3 – H 2 O на основі глиноземистого цементу та гіпсу з використанням пластифікаторів потребує досліджень у цьому напрямку. Мета статті – дослідити вплив пластифікаторів на технологічні та основні фізико-механічні властивості глиноземистого цементу та композитів на його основі. Висновки . Отримано комплекс експериментально-статистичних моделей наномодифікованих композицій на основі глиноземистого цементу та гіпсу, які дають змогу визначити вплив вхідних факторів на зростання основних фізико-механічних властивостей. Дослідженнями встановлено співвідношення основних компонентів композиту на основі 70 % глиноземистого цементу, 30 % гіпсу та пластифікатора Sika VG Sika = 0,10 ÷ 0,40; глиноземний цемент = 69,72 ÷ 69,93; Гіпс = 29,88 ÷ 29,97. За технологією виготовлення кількість компонентів було зведено до мінімуму та отримано систему сполучна речовина-наповнювач-пластифікатор. З економічної точки зору, в залежності від вимог замовника, можна регулювати витрату глиноземистого цементу і гіпсового в'яжучого в межах приблизно 10 %.
EN: Problem statement. Composition of modern concretes and mortars includes surface-active substances
that regulate processes of hydration, structure formation and, accordingly, properties of artificial stone. One of the types
of surface-active substances are plasticizers, their main purpose is to reduce water consumption. When considering their
influence, a wider range of changes in the properties of solutions and concretes can be noted. In this regard a particular
attention should be paid to aluminate, sulfate and sulfo-aluminate binders. Therefore, the development of composite
binders of the CaО – Al2O3 – SO3 – H2O system based on alumina cement and gypsum with the use of plasticizers
requires research in this direction. The purpose of the article – to investigate the effect of plasticizers on the
technological and basic physical and mechanical properties of alumina cement and composites based on it.
Conclusions. A complex of experimental and statistical models of nanomodified compositions based on alumina
cement and gypsum was obtained, and these models make it possible to determine influence of input factors on the
growth of the main physical and mechanical properties. Research has established the ratio of the basic components of
the composite based on 70 % alumina cement, 30 % gypsum and Sika VG Sika plasticizer = 0.10 ÷ 0.40; alumina
cement = 69.72 ÷ 69.93; Gypsum = 29.88 ÷ 29.97. According to the manufacturing technology, the number of
components was reduced to a minimum and a binder-filler-plasticizer system was obtained. From the economic point of
view, depending on the customer’s requirements, it is possible to regulate the consumption of alumina cement and
gypsum binder within the limits of approximately 10 %.